Main Drive Shaft (Drive shaft is one-piece with integral, single-lead, work-hardened front worm, and integral, six-lead, work-hardened rear worm. Also includes pressed-on GW-1714 and GW-9301)
MTD-GW-20912
5
Washer, Flat, 1.50 x 1.75 x .010 As Required Shim between drive shaft rear bearing and rear bearing cap to achieve 5-to-10 thousandths of an inch (.005-.010) end play on drive shaft.
MTD-736-04308
5
Washer, Flat, 1.50 x 1.75 x .03 As Required Shim between drive shaft rear bearing and rear bearing cap to achieve 5-to-10 thousandths of an inch (.005-.010) end play on drive shaft.
MTD-736-04307
5
Washer, Flat, 1.50 x 1.75 x .005 As Required Shim between drive shaft rear bearing and rear bearing cap to achieve 5-to-10 thousandths of an inch (.005-.010) end play on drive shaft.
MTD-736-04306
xx
Shim Set (Incl. two GW-1224-1; two 1224-2 and one GW-1224-3)
MTD-GW-1325C
Special Order — Manufacturer is currently out of stock and awaiting replenishment. Usually ships within 2 to 6 weeks. (You can still cancel at any time prior to shipment.)
