Product Code: MK-AN611 | SKU: AN611

Makita 2-1/2" Siding Coil Nailer, case. Manufacturer's Product Number: MK-AN611.

Product Code: MK-HM1211B | SKU: HM1211B

Makita 20 lb. Demolition Hammer, 3/4" Hex, AC/DC, case. Manufacturer's Product Number: MK-HM1211B. The air-cushioned Makita 10 AMP Demolition Hammer (model HM1211B) delivers 2,000 BPM and 10.5 ft.lb. of impact energy (14.2 Joules) for demanding concrete applications. The D-shaped handle is engineered to help absorb vibration, while the one-touch latching retainer allows easy bit changes. The hex-style chuck accepts 3/4 in. steel bits.   Features   

• Powerful 10 AMP motor for faster and efficient operation
• Comfortable rubber D-shaped grip side handle absorbs vibration; secures in four positions for operator comfort
• One-touch tool retainer action for easy accessory installation and removal
• Automatic brush cut-off protects commutator from damage for longer tool life
• Factory grease packed for reduced maintenance
• AC/DC switch for use with alternative power source
• Makita Motor Advantage engineered with field core interlocking steel laminations, dual ball bearing armature and more copper commutator bars, increasing energy transfer efficiency for more power and longer tool life
• Accepts 3/4" Hex Shank bits
• Ideal for chiseling, chipping and scaling operations
• Rugged metal gear housing for longer tool life

Specs  

• AMPS : 10
• Blows Per Minute : 2,000 BPM
• Impact Energy (ft.lbs.) : 10.5
• Impact Energy (Joules) : 14.2 J
• Vibration Control  : No
• Vibration (m/s²) : 25
• Noise Level : 96 dB
• Overall Length : 19-5/16"
• Net Weight : 20.7 lbs.
• Bit Type : 3/4" Hex - 21/32" Round
• Breaker/Demo class : 20
• Power Type : Corded
• Type (Breakers & Demolition Hammers) : Demolition Hammer
• Shipping Weight : 28.67 lbs.
• UPC Code : 088381-012287

Product Code: MK-HR4041C | SKU: HR4041C

Makita 1-9/16" Rotary Hammer, Spline, 2-mode, var. spd., case. Manufacturer's Product Number: MK-HR4041C. The Makita HR4041C 1-9/16 in. Spline-Shank Rotary Hammer Drill features a powerful 11 Amp motor engineered with field-core interlocking steel laminations, a dual ball-bearing armature and a large-surface commutator for an efficient transfer of power. It delivers up to 230 - 460 RPM and 1,300 - 2,600 BPM and has 2 modes for hammering only and hammering with rotation. Soft-start functionality facilitates control and improved accuracy, while sequential impact timing promotes faster work.   Features  

• Powerful 11 AMP motor delivers 9.5 joules of impact energy to handle the most demanding applications
• Constant speed control automatically applies additional power to the motor to maintain speed under load to complete the most challenging jobs
• Soft start suppresses start-up reaction for increased accuracy
• Variable speed control dial enables user to match the speed to the application for greater versatility
• Torque limiting clutch engineered to prevent gear damage by automatically disengaging gears if the bit binds
• One-touch tool retainer action for easy accessory installation and removal
• Sequential impact timing delivers timed hammering during rotation to minimize overlapping bit impacts for up to 50% faster drilling
• Automatic brush cut-off protects commutator from damage for longer tool life
• 2-mode operation for "Hammering Only" or "Hammering with Rotation" for multiple applications
• "No hammering when idling" function helps increase tool life

Specs  

• AMPS : 11
• Max. Capacity (concrete drilling) : 1-9/16"
• Optimum Range (concrete drilling) : 5/8" - 1-1/4"
• Max. Capacity (concrete drilling w/ core bit) : 4-5/8"
• Impact Energy (Joules) : 9.2 J
• Impact Energy (ft.lbs.) : 6.8
• Blows Per Minute (variable speed) : 1,300 - 2,600 BPM
• No Load Speed (variable speed) : 230 - 460 RPM
• Vibration Control  : No
• Vibration (m/s²) : 15
• Overall Length : 16-7/8"
• Cord Length (ft) : 16.4'
• Net Weight : 14.8 lbs.
• Bit Type : Accepts Spline shank
• Power Type : Corded
• Bind-Up Control : No
• Shipping Weight : 20.3 lbs.
• UPC Code : 088381-081191