Makita 1" Rotary Hammer, accepts SDS-PLUS bits, 3-mode, var. spd., reversible, case (D-handle). Manufacturer's Product Number: MK-HR2475.

Makita’s versatile HR2475 1-inch Rotary Hammer (Accepts SDS-PLUS) delivers more efficient hitting in a compact size for faster, more productive work.

Features

• Powerful 7.0 AMP motor delivers 2 ft.lbs./2.7 j. of impact energy to handle the most demanding applications
• 3-mode operation for "Rotation Only", "Hammering with Rotation" or "Hammering Only" for multiple applications
• One-touch sliding chuck for quick bit changes
• Torque limiting clutch engineered to prevent gear damage by automatically disengaging gears if the bit binds
• Variable speed trigger enables user to match the speed to the application for greater versatility
• Ergonomic "D-shaped" handle with rubberized soft grip for increased comfort
• Recessed lock-on button for continuous use
• 40 bit angle settings allow the bit to be set at different positions for operating convenience
• Extended life brushes are longer for more work between service intervals and less downtime
• Sequential impact timing delivers timed hammering during rotation to minimize overlapping bit impacts for up to 50% faster drilling

Specs

• AMPS : 7
• Max. Capacity (concrete drilling) : 1"
• Optimum Range (concrete drilling) : 3/16" - 1/2"
• Max. Capacity (concrete drilling w/ core bit) : 3-1/8"
• Impact Energy (ft.lbs.) : 2
• Impact Energy (Joules) : 2.7 J
• Blows Per Minute (variable speed) : 0 - 4,500 BPM
• No Load Speed (variable speed) : 0 - 1,100 RPM
• Vibration Control  : No
• Vibration (m/s²) : 15.5
• Overall Length : 16-7/8"
• Cord Length (ft) : 13.1'
• Net Weight : 6.6 lbs.
• Bit Type : Accepts SDS-PLUS
• Power Type : Corded
• Bind-Up Control : No
• Shipping Weight : 12.09 lbs.
• UPC Code : 088381-603508

WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement and other masonry products, and
• arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles. For more information, go to www.p65warnings.ca.gov