product name

Troy-Bilt 11381 1.5HP Speedy Hoe Roto-Tiller (S/N 5000-Up) Speedy Hoe/MINI Tiller

Model: 512037

Save
 Part Not Listed?Part Not Listed?
product name

MAIN ASSEMBLY

...
...
1
SCR-PH HD M10-24X1.375 ITEMS WHICH SHOULD BE AVAILABLE FROM YOUR LOCAL HARDWARE STORE, AS WELL AS BEING AVAILABLE FROM GARDEN WAY. MTD-1983716
...
2
SWITCH-IGN. 96506 MTD-1983718
...
xx
BRKT-SWITCH PNT MTD-1981012001
...
3
ASSM-UPR HANDLEBAR MTD-1981046
...
3A
GRIP-HANDLEBAR 97030 MTD-1983728
...
4
PAD-ISOLATOR TRIGGER MTD-1983649
...
5
HARNESS-WIRE MTD-1766998
...
6
Flat Weld Nut, #10-24 MTD-712-0127
...
7
ASSM-TRIGGER & CABLE MTD-1983646
...
8
SCREW 5/16-18 x 2.0 ITEMS WHICH SHOULD BE AVAILABLE FROM YOUR LOCAL HARDWARE STORE, AS WELL AS BEING AVAILABLE FROM GARDEN WAY. MTD-710-1174
...
9
WASHER-BOW 1.0X.328X.059 MTD-1983650
...
10
KNOB MTD-1763767
...
11
H/BAR-LWR RIGHT PNT MTD-1984509001
...
12
H/BAR-LWR LEFT PNT MTD-1984510001
...
13
WASHER-FLAT SH ITEMS WHICH SHOULD BE AVAILABLE FROM YOUR LOCAL HARDWARE STORE, AS WELL AS BEING AVAILABLE FROM GARDEN WAY. MTD-1983714
...
14
SCR-HH M8-32X1.0 ITEMS WHICH SHOULD BE AVAILABLE FROM YOUR LOCAL HARDWARE STORE, AS WELL AS BEING AVAILABLE FROM GARDEN WAY. MTD-1983661
...
15
ENGINE, TECUMSEH TC-200-2026C MTD-NA
...
16
Hex Lock Nut ITEMS WHICH SHOULD BE AVAILABLE FROM YOUR LOCAL HARDWARE STORE, AS WELL AS BEING AVAILABLE FROM GARDEN WAY. MTD-712-0324
...
17
BOLT, HEX HEAD, 14-20 X 41/2 ITEMS WHICH SHOULD BE AVAILABLE FROM YOUR LOCAL HARDWARE STORE, AS WELL AS BEING AVAILABLE FROM GARDEN WAY. MTD-1983663
...
18
HAIRPIN COTTER MTD-1185590
...
19
CLUTCH ROTOR MTD-1983630
...
20
SPRING, CLUTCH MTD-H213773
...
21
DRAG STAKE MTD-1981014001
...
22
PIN-CLEVIS, 5/16 X 7/8 MTD-1983723
...
23
DRAG STAKE BRACKET MTD-1981010001
...
24
Click Pin MTD-714-0145
...
25
TINE, OUTER RIGHT HAND SIDE MTD-1984430
...
26
TINE, INNER RIGHT HAND SIDE MTD-1984429
...
27
BOLT, 1/4-20 X 1 1/8" (ATTACHES DRAG STAKE TO TRANSMISSION) ITEMS WHICH SHOULD BE AVAILABLE FROM YOUR LOCAL HARDWARE STORE, AS WELL AS BEING AVAILABLE FROM GARDEN WAY. MTD-1983658
...
28
TINE COVER W/DECALS MTD-1985791
...
29
PLATE, REAR, TNE COVER MTD-1981022010
...
29A
ROCK SHIELD MTD-1981018010
...
30
SCREW, #10-32 X 1/2", SELF TAPPING, (FOR REAR TINE COVER PLATE) ITEMS WHICH SHOULD BE AVAILABLE FROM YOUR LOCAL HARDWARE STORE, AS WELL AS BEING AVAILABLE FROM GARDEN WAY. MTD-1983662
...
31
Lock Washer ITEMS WHICH SHOULD BE AVAILABLE FROM YOUR LOCAL HARDWARE STORE, AS WELL AS BEING AVAILABLE FROM GARDEN WAY. MTD-936-0329
...
32
BOLT, 1/4-20 X 2" MTD-90021
...
33
BOLT, 1/4-20 X 7/8 MTD-90030
...
34
DUST COVER SETSCREW MTD-1904183
...
34A
AIR VENT SCREW/FILL HOLE SCREW MTD-NA
...
35
TINE, INNER LEFT HAND SIDE MTD-1984427
...
36
TINE, OUTER LEFT HAND SIDE MTD-1984428
...
37
WASHER, FELT MTD-1983713
...
38
CLUTCH DRUM & HUB MTD-1984514
...
39
TRANSMISSION ASSEMBLY MTD-1983631
...
xx
DECAL-LOGO HHT MTD-11073
...
xx
DECAL-CAUTION MTD-1983094
...
xx
DECAL-WARNING MTD-1983095
...
xx
DECAL-THROTTLE HHT MTD-1983096
...
xx
DECAL-ENGINE ON/OFF HHT MTD-1983097
...
xx
SPACER-TINE 1.0X.8X1.31LG MTD-1983648
...
xx
CUP-MEASURING MTD-1983647
...
xx
KIT-TINE REPLACE 85059 MTD-1982393
...
xx
ASSM-TRANS 85029 MTD-1983631
...
xx
7" CABLE TIE MTD-725-0157
...
xx
KIT-TINE SPACER MTD-1981053

TRANSMISSION

...
...
xx
ASSM-TRANS 85029 MTD-1983631
...
1
TRANS-CASE LH PT/85023/00 MTD-1983628
...
2
TRANS-CASE RH PT/85024/00 MTD-1983629
...
3
Oil Seal, .750 x 125 MTD-921-04044
...
4
Worm Input Shaft Assembly MTD-1918307
...
5
BEARING-INPUT MTD-1983731
...
6
THRUST BEARING MTD-741-04052
...
7
BEARING-BALL PT/85035/00 MTD-1983637
...
8
ASSM-SHAFT OUTPUT AS/85037/00 MTD-1981052
...
9
BUSHING-1.25X.755X.73 MTD-1915034
...
10
PIPE PLUG 1/8-27 HEX SOC MTD-737-04178
...
11
Hex Screw, 1/4-20 x 7/8 MTD-710-0206
...
12
SCREW 1/4-20X1.125 (THREE LOCATIONS ON TRANSMISSION CASE) MTD-1983658
...
13
Hex Lock Nut MTD-712-0324
...
14
WASHER-THRUST .775X.05 (.050") USE AS REQUIRED TO SET ENDPLAY: (.002 - .010) & CENTER WORM GEAR IN THE TRANSMISSION CASE. MTD-1983635
...
15
WASHER-THRUST .775X.05 (.040") USE AS REQUIRED TO SET ENDPLAY: (.002 - .010) & CENTER WORM GEAR IN THE TRANSMISSION CASE. MTD-1983635
...
16
WASHER-THRUST .505X.02 (.020") USE AS REQUIRED, SET ENDPLAY: (.002 -.010) WORMSHAFT & TIMESHAFT ENDPLAY: .002 - .010 MTD-1983641
...
17
THRUST WASHER USE AS REQUIRED, SET ENDPLAY: (.002 -.010) WORMSHAFT & TIMESHAFT ENDPLAY: .002 - .010 MTD-936-0616
...
18
WASHER-THRUST .92X.5X.06 MTD-1983638
...
19
Washer ITEMS ARE NOT PART OF THE 19883631 TRANSMISSION ASSEMBLY. THEY MUST BE ORDERED SEPARATELY IF REQUIRED. MTD-736-0159
...
20
SCR-HH 1/4-20X5 ITEMS ARE NOT PART OF THE 19883631 TRANSMISSION ASSEMBLY. THEY MUST BE ORDERED SEPARATELY IF REQUIRED. MTD-1983663
...
21
CLUTCH-DRUM & HUB ITEMS ARE NOT PART OF THE 19883631 TRANSMISSION ASSEMBLY. THEY MUST BE ORDERED SEPARATELY IF REQUIRED. MTD-1984514
...
22
SCR M10-32X.25 ITEMS ARE NOT PART OF THE 19883631 TRANSMISSION ASSEMBLY. THEY MUST BE ORDERED SEPARATELY IF REQUIRED. MTD-1983052
...
23
KIT-DUST CAP ITEMS ARE NOT PART OF THE 19883631 TRANSMISSION ASSEMBLY. THEY MUST BE ORDERED SEPARATELY IF REQUIRED. MTD-1904183
...
24
WASHER-FELT 1.5X.72X.13 ITEMS ARE NOT PART OF THE 19883631 TRANSMISSION ASSEMBLY. THEY MUST BE ORDERED SEPARATELY IF REQUIRED. MTD-1983713
...
...
...
Processing