You are here: Home > EUREKA > Eureka Upright Vacuum Parts > 4870 Eureka Ultra Smart Vac > Eureka 4870 Belt Replacement Guide

Eureka 4870 Ultra Smart Belt Replacement Guide

Replacing your Eureka 4870 Boss Ultra Smart belt is quick and easy. in just 6 steps, you'll have your machine back up and running like new again. If you have any questions, or run into any problems replacing your belt, please contact us; we're happy to help!
1. Move brush roll control lever to hard
floor position.
2. Remove 3 base plate screws using a
phillips screwdriver. Lift plate off base.
3. Remove brush roll. Place new belt
around motor shaft and brush roll.
the belt will appear to be too large. This is

4. Insert left end into base.
5. Insert right end into base. Make sure
it is fully inserted into the correct
Belt will still appear to be too large.
This is okay.
6. Replace base plate by inserting all
4 tabs into slots on base. Rotate the
plate down onto the cleaner base and
replace 3 screws.

The belt for your vacuum will not be engaged until you return it to the carpet setting, which is why it appeared to be too loose. The correct Eureka Original Factory Belt for your machine is listed below. If we can provide any assistance to you, please let us know.
Sort By:
Page of 1
Eureka Electrolux Sanitaire Belt R Longlife Flat 4870
Eureka Belt R Longlife Flat 4870 #61110
List Price $9.40
Sale Price $7.83
You save $1.57!
Usually ships Same Day / Next Day